ZRAY Screw Valve High Pressure SUP Kayak
397020
Delivery between
-
ZRAY High-Pressure Valve – the original spare part for your SUP & kayak
The ZRAY High-Pressure Valve is an original spare part in the form of a screw valve for all inflatable ZRAY Stand Up Paddle boards and drop-stitch kayaks. If your valve is leaking, damaged or worn out, it gets your board or kayak back to full operating pressure in no time – without having to buy a whole new board.
Description & Purpose
The high-pressure valve sits on the air chamber of your inflatable SUP board or kayak and reliably keeps the pumped-in air inside the drop-stitch core. Over the years, a valve can start to leak due to sand, UV exposure or mechanical stress. With this replacement screw valve you swap out the faulty part and restore full airtightness – the affordable and sustainable alternative to buying a new board.
Features & Benefits
- Original ZRAY spare part – a precise fit for ZRAY SUP boards and kayaks.
- Screw-valve design – simply screws into the existing valve base.
- High-pressure rated – reliably holds the operating pressure of your drop-stitch board.
- Quick swap – old valve out, new valve in, back on the water.
- Cost-saving – rescues your board or kayak instead of an expensive replacement.
Compatibility & Use
The valve is compatible with all ZRAY SUP boards and drop-stitch kayaks. It comes into play whenever the standard high-pressure valve is leaking or needs replacing. To swap it, you unscrew the old valve out of the base with a suitable valve wrench and screw the new one back in.
Note: Before ordering, please check that your board or kayak is part of the ZRAY range so the valve fits securely.
Scope of Delivery
- 1x ZRAY high-pressure valve (screw valve) as a spare part
Technical Data
| Brand | ZRAY |
| Product type | Spare part / accessory |
| Valve type | Screw valve / high-pressure valve |
| Function | Replacement high-pressure valve |
| Compatibility | All ZRAY SUP boards & drop-stitch kayaks |
Care & Notes
- Clean sand and dirt off the valve and sealing area before installation.
- Screw the valve in straight and hand-tight, without cross-threading it.
- After use in salt water, rinse it with clean fresh water.
- A suitable valve wrench is recommended for the swap (not included in delivery).
FAQ
Does this valve fit my ZRAY SUP board?
Yes. The high-pressure valve is compatible with all ZRAY SUP boards and ZRAY drop-stitch kayaks and replaces the standard factory valve.
What is a screw valve or high-pressure valve?
A screw valve is threaded into the existing valve base of your inflatable board or kayak. As a high-pressure valve, it holds the high operating pressure that drop-stitch constructions require.
Is the valve also suitable for kayaks?
Yes. Alongside the SUP boards, it is designed as a replacement high-pressure valve for all ZRAY drop-stitch kayaks.
How do I replace the valve?
Unscrew the old valve out of the base with a suitable valve wrench, then screw the new valve back in straight and hand-tight. Make sure the sealing area stays clean throughout.
Is a valve wrench included?
No. The delivery contains the replacement valve only. A suitable valve wrench is recommended for a clean, secure swap and can be purchased separately.
Conclusion
With the ZRAY High-Pressure Valve you keep your SUP board or kayak ready to go – an affordable original spare part that makes your board airtight again. Order now and get back on the water fast!
